Dissolution vessel Washer Model DVW 1
Dissolution vessel clean-up is tedious and time consuming task for all quality control and drug formulation labs. Users of Dissolution Vessel Washer essentially eliminate the need to remove, drain, clean and reposition dissolution vessels.

Main Features
1. In-Place Clean-up
2. Washes 6 Vessels in 5-6 Minutes
3. Validation Complied
4. Qualification Documents Available
5. Fits All Dissolution Vessel
6. Fully Mobile
7. Nozzles available for washing of Vessel I Paddle I Bath I Tank
8. Breakage of Vessel Greatly Reduced
Ultra PORTABLE
Easily placed on a lab cart or table because of its compact size and light weight
Easy To Use
No special training is required. Benefits achieved from day one
- Fits all tester vessels
- Even stubborn surfactants are easily washed away.
- Waste Tank is Equipped with an Electronic Level Sensor to Prevent Overflow
MAINTAINS VALIDATION COMPLIANCE

Each time a vessel is positioned into a Dissolution Bath, its centering must be measured and the height of the paddle or basket must be validated. With the DVW 1, the vessels are cleaned in-place thus maintaining accurate parameters by eliminating the time consuming step of confirming their correct repositioning. As a result cleaning qualification is made possible.
IMPROVES PRODUCTIVITY EFFICIENCY AND COST PERFORMANCE
As vessels are washed in-place, productivity and efficiency in the dissolution laboratory are greatly increased. In place washing also minimizes breakage and subsequent re-calibration thus further improving cost performance.
• Breakage Greatly Reduced
• Cleaning Qualification Made Possible
Reduces number of dissolution test failures
DIRECT INJECTION WASH High pressure diaphragm pumps exert 45psi of pressure through strategically placed nozzle jet ports to provide optimum, 360 degree wash quality. Even stubborn surfactants are easily washed away. Unlike sprinkler type washers, where the strength of the spray is reduced with the rotation of the nozzle, the Disso Clean DVW 1 spray remains constant throughout the wash cycle.
TYPICAL SPECIFICATIONS
Electrical Power : 1 OOV � 230V AC 50 I 60 Hertz
Maximum Current : 12V
Nozzle Internal Pressure Test: 72.5psi (5.09kg I cm2)
Normal Washing Spray Pressure: 29.0psi (2.04kg I cm2)
Unit Dimensions : 59cm (I) x 28cm (d) x 25.5cm (h) (23" x 11 "x 1 O")
Unit Weight : 11.2kg (Approx. 251bs)
Flow Speed : Approx. 150ml per second
Maximum Operating Temperature : 55°C
Operating Humidity : Up to 90% RH Continuous Use : Up to 100 minutes
Capacity: Cleans up to 25, one liter vessels twice before refilling the 20 liter wash tank and emptying the 20 liter waste tank
Wash Time : Approx. 5 - 6 minutes for 6 vessels