Analytical

Microprocessor Controlled pH Analyzer (PHAN)

pH measurement is so basic and a fundamental requirement in so many fields that people have stopped thinking further about it long ago. But Labindia with its commitment to Quality has not! Labindia has designed and built the most compact, accurate and user-friendly pH Analyzer with unmatched features.

pH is a temperature dependent phenomenon, hence temperature compensation is essential. This instrument gives simultaneous digital read-out of pH & temperature, with automatic temperature compensation.

This instrument has four sets of 10 memory readings with averaging facility, a user-friend feature.

Correct pH measurement and control of pH are the prime factors for successful purification of water, effluent treatment, food processing, manufacturing of sugar and quality medicines.

The equipment comes to you backed by Labindia protection and prompt after-sales-service.

It is a pH meter with a difference you can measure!

 

Features:

• Advanced micro-controller based user-friendly state-of-the-art design.

• Sleek moulded cabinet with Multifunction splash-waterproof polyester keyboard with soft keys.

• User interactive software with direct keys for ease of operation with protection against invalid entries.

• 20 x 2 line back lighted LCD display.

• Simultaneous measurement of pH, mV and Temperature. SCAN key for displaying

• the stored pH values with Memory SET & Reading No.

• Non-volatile memory storage of 40 pH readings in four sets of 10 readings each.

• AVERAGE function key to check the Average of the pH reading stored in the selected memory SET.

• MEM CLEAR Key to clear the pH data / reading memory buffer block and calibration data.

• Calibration of instruments with 4.00, 7.00, 9.20 and User Assigned / selected calibration standard with ASSIGN key.

• Built-in ATC with selection of Automatic / Manual mode. ATC temperature at 25°C or at Manually User-entered Temperature. Automatic Temperature Compensation by PT100 Temperature sensor Range 0 to 100°C.

• Input Stability Indication for reproducible results.

• Probe Check Mode for checking Electrode Aging.

• Error indication helps user to trace the problem.

• Audible Beep indication during Valid Key operation.

 

Specifications

pH range                                    0.00 to 14.00

Resolution                                 0.01 pH

Relative Accuracy                     +/- 0.02 pH

Slope                                         80% to 120%

Sensor                                       Combination pH electrode / Two separate Electrodes

Calibration                                 Standard 7.00, 4.00 & 9.20 pH with buffer recognition.

millivolt

mV range                                   0 to +/- 1999.9 mV

Resolution                                 +/- 0.1 mV

Relative accuracy                      +/- 0.2 mV

Temperature

Temperature range                    0 to 99.90°C

Resolution                                 0.1°C

Relative accuracy                      +/- 0.2°C

Sensor                                       RTD PT 100

Temp. Compensation                Manual / Automatic

Display                                      20 x 2 line back lighted Liquid Crystal Display(LCD).

Keyboard                                   Splash water-proof polyester soft keys.

Data Storage                              Non-Volatile memory.

Input                                          1 BNC, 1 ATC - PT 100

Input Impedance                        > 1012 ohms

Electrode diagnosis                  Yes

Environmental Operating Conditions

a) Operation                              Indoor

b) Temperature                          Ambient to 45°C

c) Relative humidity                  5 to 90% non-condensing

d) Altitude                                  0 - 2000m

Power requirement                    AC-DC Adapter 100-300 V AC, 47-63 Hz

                                                    9.0V DC@1.0A

Dimensions                               130 x 190 x 55mm (W x D x H)

Weight                                       650 gms.

Share Product

Enquiry Form
Website Form