The SMART Trac II partners advanced, high performance NMR technology with the fast, reliable drying capability of the SMART Turbo Microwave Moisture/Solids Analyzer to create a system which yields fast, accurate results without solvents or calibration.

  • Analyze twice as many samples per day
  • Green! No solvents, 95% less energy needed
  • No costly calibration maintenance
  • More accurate than FTIR and NIR
  • AOAC Compliant (Method 2008.06)


The SMART Turbo provides rapid, accurate moisture/ solids analysis for a broad range of products. The system’s patented IntelliTempTM temperature control ensures that all moisture is completely removed without overheating the sample for better precision. SMART Turbo accurately analyzes a wide variety of sample types including solids, powders, slurries and liquids (0.1 - 99.9% moisture).


High Performance NMR Technology

NMR directly measures fats and oils. Unlike indirect methods, which only measure the surface of a sample, NMR detects fats and oils throughout the sample, yielding an accurate analysis that is independent of sample uniformity and not affected by changes in color or texture.



  • Analyze for moisture/solids with SMART Turbo
  • Roll sample and place in Trac Tube
  • Insert into NMR chamber for analysis
  • Precise results in 8 seconds!




MOISTURE/SOLIDS RANGE                0.01% to 99.99% in liquids, solids and slurries. 0.01% resolution

BALANCE CAPACITY                          100 grams, 0.1 mg readability

PROGRAM/DATA STORAGE               100 methods and 300 results

STANDARD SOFTWARE                      Software with proprietary Turbo Technology and

                                                                IntelliTemp Temperature Controlled Drying.

DATA ENTRY                                          Keypad with menu-driven software

DISPLAY                                                 Black and white VGA (320 x 240) Optional fl at panel LCD display

ACCESSORY PORTS                            2 serial, RS 232, 9 pin ports for network connection, external balance, or bar code reader, Parallel Port for                                                                    external printer, 4 USB ports, 1 Ethernet CAT 5 port

STANDARD PRINTER                           Internal impact printer

NETWORK INTERFACES                     RS232, USB, Ethernet



SMART Turbo                                      22 in (w) x 23 in (d) x 15 in (h)

                                                              56 cm (w) x 59 cm (d) x 37 cm (h)

SMART Trac II Magnet                        4 in (w) x 14 in (d) x 13 in (h)

                                                              36 cm (w) x 36 cm (d) x 33 cm (h)

SMART Trac II Processor                   2 in (w) x 13 in (d) x 16 in (h)

                                                             30 cm (w) x 33 cm (d) x 41 cm (h)

                                                             May be located up to 9’8” (3m) away from the magnet.


SMART Turbo                                       55 lbs, 25 kg

SMART Trac II Magnet                         110 lbs, 50 kg

SMART Trac II Processor                     37 lbs, 17 kg


AMBIENT AIR TEMPERATURE          Temperature must be between 15°C and 30°C. For optimum stability and performance, the ambient                                                                              temperature should not vary more than 5°C/day.

VOLTAGE                                            100-240 V (50-60 Hz)

POWER                                               800 VA maximum, UPS recommended if power is not reliable


SMART Turbo                                       10 amps (110-127 V, 60 Hz); 5 amps (220-240 V, 50/60 Hz

                                                              10 amps (100 V, 50/60 Hz); 5 amps (200-208 V, 50/60 Hz)

SMART Trac II Magnet & Processor      6.3 amps (100-240 V, 50/60 Hz)

Power Conditioner Requirements           2.1 kVA 120 V, 60 Hz

                                                               1.8 kVA 240 V, 50 Hz

RF PULSE GENERATOR:                     Pulse power 300 W nominal. Pulse times variable in 100 ns increments. Transmit and receive phases                                                                            selectable 0, 90, 180 and 270°. Nominal 90° pulse times 3 μs (10 mm probe) and 4.5 μs (18 mm probe)

MAGNET:                                                Permanent, thermally stabilized, 0.55 T (23.4 MHz proton), Homogeneity better than 10 ppm

SIGNAL DETECTION:                          Dual channel (quadrature) detection with programmable low-pass filtering. Programmable data acquisition                                                                     rate up to 10 MHz per pair of points.

Share Product

Enquiry Form
Website Form