Analytical

TAP DENSITY TESTER- TD 1025

Labindia has designed Tap Density Tester, to measure the tapped density of powders, granules and similar products. The tester offers a

standardized and repeatable method of measuring tapped volumes of powders. The unit provides users friendly operation.

Salient Features

  • Designed to meet current USP and ASTM specifications for tap density testing
  • Two Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100 ml and 250 ml cylinders.
  • The unique simultaneous tapping and rotating motion assures that the material is evenly packed
  • Calculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density.
  • Balance Interface for sample weight transfer

 

SPECIFICATIONS

Sr. No.      Parameters                       Specifications

1              Test Method                 USP Method I (300 taps per minute)

                                                     USP Method II (250 Taps per minute)

                                                     USP Method III (55 taps per minute) and

                                                      ASTM (Optional)

2        Tap Count Range               10-9999

3        Type of Drive                       Direct Drive with steeper motor

4        Drop height                          Position I = 14, ± 2mm

                                                      Position II = 3, ± 0.2mm

5        Platform rotation                 5-15 rotation / minute

6        Display                               20X2 Line back lighted LCD display

7        Keyboard                            Alphanumeric splash water proof polyester soft keys

8        Operating Modes                USP, User selectable

9        Output       Printer               Parallel Port

                            RS-232C           PC Connectivity for Data Downloading

10      Cylinders                             1 each, 100ml & 250ml, Glass.

                       Optional Cylinder = For ASTM test - 10mL, 25mL and 50mL, Glass 

                                                       For USP III :- 100mL SS cylinder

11      Cylinder Holder                    1 each for 100 ml & 250 ml.

                       Optional Adapters = For ASTM test - 10mL,25mL and 50mL cylinder,

                                                         For USP III :- 100mL SS cylinder

12      Power Requirement               230VAC / 50 HZ, 45W

13      Environmental Operating Conditions a) Operation Indoor

                                                                     b) Temperature ambient to 45° C

                                                                     c) Humidity 20% to 80%

14 Dimensions (Approx)                  340 X 310 X 200 cm (W X D X H)

15 Shipping weight (Approx)           13 kg

Share Product

Enquiry Form
Website Form