WALK IN STABILITY CHAMBER (HUMIDITY CHAMBER)

WALK IN STABILITY CHAMBER (HUMIDITY CHAMBER)

Features:

•  
• Double Walled In Inner Made Of SS 304 Matt/Buff finish & Exterior Made Of GI Powder Coated Shade in REGULAR MODEL.
• Inner/ outer made of SS 304 Matt/Buff finish in GMP MODEL.
•  
• The High Grade PUFF Insulation Provided In Between The Wall To Minimize The Heat Loss.
• The Temperature & Humidity %RH Controller By Microprocessor Based PID Temp. & Humidity Controller with Dual Digital Indicator. & PT- 100 Sensor For Temp & Captious Type Sensor For RH%
• The Air Circulation Is Being Performed By Motorized Blower Firmly Installed At The Back Or Top Of The Unit.
• The Cooling Kit Includes Hermetically Sealed Compressor, Condenser, Fan Motor Etc. & Are Safely Placed At The Bottom/ Top Of Unit. The Cooling System Is CFC Free.
• The Humidification through Steam Injection System. Complete with Reservoir Tank Boiler.
• A Fully Insulated Door With Glass View Is Provided For Clear Observation Of Test
• Temp. Range: - 20⁰C To 60⁰C. Temp. Accuracy: Within + 1⁰C
• Humidity Range : 40% RH To 90% RH
• Humidity Accuracy: Within + 2% RH to + 3% RH
• Suitable Rack Provided both the Side to Install the Trays.
• SAFETY FEATURES

1. Low Water Level Control with Alarm Facility for Reservoir tank.
2. Safety Controller with Alarm In case of Temp Overshoot/ Undershoot.
3. MCB
4. Direct % RH Electronic Capacitance type sensor.
5. Overload Protector

Specifications: